FIRE MAINTENANCE SERVICE
When we talk about fire-fighting maintenance, whether ordinary or extraordinary, we refer to a series of activities to be carried out periodically and aimed at preserving the operation and efficiency of fire-fighting systems over time.
It is not only a legal obligation. Fire-fighting maintenance is essential for the protection of people, properties and environments.
Owning a firefighting system and not performing proper maintenance on it is equivalent to owning no system at all.
Therefore, it is important to pay close attention to maintenance tasks by choosing qualified professionals.
The following points must be considered for a proper fire maintenance:
● The technical standard of reference
● The stages and periodicity of the visits
● The planned verification activities
● The documentation that the Client must provide to the Maintenance Technician
● The documentation that the Maintenance Technician must provide to the Client and the Assessor, confirming the correct execution of the work
● The equipment required for maintenance operations.
With a widespread distribution throughout the country and with the most advanced techniques and equipment, we are able to guarantee a punctual and qualified fire maintenance service as required by Ministerial Decree 01/09/2021 (so-called “Controls Decree”)
DON’T PUT YOUR BUSINESS AT RISK.
Carry out fire-fighting maintenance with those who has been knowing, protecting and producing the systems for over 30 years.
Constantly check that your fire extinguishing system is working properly.
Contact us without obligation, for further information or for a free quotation. One of our operators will process your request and take care of it personally.
Error: Contact form not found.
MAINTENANCE OF FIRE-FIGHTING SYSTEMS
We carry out periodic maintenance of different types of fire-fighting systems and systems.
WATER MIST
Maintenance of water mist fire-fighting systems with cylinders or pumping unit as required by the UNI EN 14972 standard
GAS
Maintenance of fire extinguishing systems for inert gases, chemical gases and CO2 according to the UNI 11280 standard and on the UNI EN 15004 series of standards.
FOAM
Maintenance of foam fire extinguishing systems according to UNI EN 13565
AEROSOL
Maintenance of automatic or manual condensed aerosol fire extinguishing systems according to UNI EN 15276-2
OXYGEN REDUCTION
Maintenance of oxygen reduction fire extinguishing systems (ORS) according to UNI EN 16750
SPRINKLER
Maintenance of automatic sprinkler fire extinguishing systems as required by UNI EN 12845
DIFFERENTIAL PRESSURE
Maintenance of differential pressure smoke control systems according to UNI EN 12101-6
IRAI
Maintenance of automatic fire detection and alarm systems as required by the UNI 11224 standard
EVAC
Maintenance of voice alarm systems for emergency purposes according to UNI ISO 7240-19 o CEN/TS 54-32
FIRE EXTINGUISHERS
Maintenance of portable and wheeled fire extinguishers as required by the UNI 9994-1 standard
FIRE EXTINGUISHERS
Maintenance of hydrant networks according to UNI 10779, UNI EN 671-3, UNI EN 12845 standards
FIRE DOORS
Maintenance of fire-resistant opening doors and windows according to UNI 11473
SMOKE AND HEAT DISPOSAL
Maintenance of natural and forced smoke and heat disposal systems (SENFC AND SEFFC) according to UNI 9494-3
QUALIFIED MAINTENANCE TECHNICIANS
Our qualified maintenance technicians are trained at the Tema Safety & Training Academy, one of the first training centres in Italy authorized by UMAN of ANIMA Confindustria.
By issuing the Control Decree of 01/09/2021 and the CNVVF Circular, prot no. 14804 of 06/10/2021, the "General criteria for the control and maintenance of fire safety systems, equipment and other systems, pursuant to Article 46, paragraph 3, letter a) point 3, of Legislative Decree no. 81 of 9 April 2008" were defined.
This is an important step for the entire sector which leads to a quality maintenance, done according to the rule of the art.
As a matter of fact, the Decree introduces for the first time the "qualified maintenance technician". This is a professional figure who, in order to operate on the systems, will have to follow a specific training course and undergo an examination to verify the acquired skills. Then the National Fire Brigade Committee will issue a certificate as "a qualified maintenance technician".
Tema Sistemi has been carrying out a quality maintenance service since 2017, choosing to obtain an ICIM certification on a voluntary basis to certify the high-quality work of its maintenance technicians.
FIRE SAFETY MAINTENANCE CERTIFICATIONS
UNI CEI EN 16763:2017
ISO 45001:2018
FIRE EXTINGUISHING SYSTEM MAINTENANCE PROJECTS VENICE REFINERY
VENICE REFINERY
CLIENT: Eni SPA – DIV. R&M
LOCATION: Porto Maghera
YEAR: 2010-2018
TYPE OF WORK: Maintenance of fire-fighting systems
OFF-SHORE PLATFORM
CLIENT: Adriatic LNG
LOCATION: Alto Mar Adriatico
YEAR: 2020 – IN CORSO
TYPE OF WORK: Five-year contract for the maintenance of fire-fighting systems
CORLETO PERTICARA REFINERYA
CLIENT: TotalEnergies
LOCATION: Corleto Perticara
YEAR: IN PROGRESS
TYPE OF WORK: Maintenance of fire-fighting systems